Skip to main content

Error messages list

Updated

WiFi icon  doesn't appear on the scale

If during the installation process, the WiFi icon doesn't appear after entering your WiFi password, please try the following :

  1. Restart your router. Make sure your smartphone is well connected to your home WiFi network.
    Note - If your router is a dual band (2,4 GHz and 5GHz), make sure you are using the 2,4GHz frequency band during the installation.
  2. If you have set up a MAC address filtering on your router, make sure that the MAC address of the balance has been added to the list.
  3. Launch the app iHealth MyVitals and login your account.
  4. Go in MENU > Set up my devices > Select a new device> Scales > Core (HS6) > Scan QR code.
  5. Open batteries compartment, remove and re-install one battery and press the SET button until "SET" is displayed on the screen of the scale.
  6. Use the app to scan the QR code and wait for few seconds.
  7. Enter your WiFi password taking care of lower and upper case letters.

Wait for few seconds. The WiFi icon on the scale starts blinking and get steady when the WiFi connection is established.

WiFi icon  disappears after blinking several times

If during the installation process, after entering your WiFi password, the WiFi icon blinks several times then disappears, please try the following :

  1. Restart your router. Make sure your smartphone is well connected to your home WiFi network.
    Note - If your router is a dual band (2,4 GHz and 5GHz), make sure you are using the 2,4GHz frequency band during the installation.
  2. If you have set up a MAC address filtering on your router, make sure that the MAC address of the balance has been added to the list.
  3. Launch the app iHealth MyVitals and login your account.
  4. Go in MENU > Set up my devices > Select a new device> Scales > Core (HS6) > Scan QR code.
  5. Open batteries compartment, remove and re-install one battery and press the SET button until "SET" is displayed on the screen of the scale.
  6. Use the app to scan the QR code and wait for few seconds.
  7. Enter your WiFi password taking care of lower and upper case letters.

Wait for few seconds. The WiFi icon on the scale starts blinking and get steady when the WiFi connection is established.

Time out

If during the installation process, after entering your WiFi password, the message "Time out" appears in the app, please try the following :

  1. Restart your router. Make sure your smartphone is well connected to your home WiFi network.
    Note - If your router is a dual band (2,4 GHz and 5GHz), make sure you are using the 2,4GHz frequency band during the installation.
  2. If you have set up a MAC address filtering on your router, make sure that the MAC address of the balance has been added to the list.
  3. Launch the app iHealth MyVitals and login your account.
  4. Go in MENU > Set up my devices > Select a new device> Scales > Core (HS6) > Scan QR code.
  5. Open batteries compartment, remove and re-install one battery and press the SET button until "SET" is displayed on the screen of the scale.
  6. Use the app to scan the QR code and wait for few seconds.
  7. Enter your WiFi password taking care of lower and upper case letters.

Wait for few seconds. The WiFi icon on the scale starts blinking and get steady when the WiFi connection is established.

Lo

Make sure batteries are correctly installed.

If the LO message persists, install a new set of batteries.

Do not use rechargeable batteries.

Er0, Er3, Er6, Er7, Er8, Er9, Er10

Remove batteries. Wait for 1 minute and re-install a new set of batteries.

If the problem persists, contact your support team.

Er1

Current user's weight is outside the measurement range (50 - 180Kg /11-140 lbs) 

Er2

The weight measured by the scale is not stable. Put your feet properly on the center of the scale and don't move during all the measurement.

Er5

The scale failed to sync your results to your personal secured Cloud account.

Please make sure to follow the step-by-step instructions on setting up your HS6 Core scale. Once you have set-up your HS6 Core, the scale will automatically sync your measurement results to the app and to your personal secured Cloud account. It may need several seconds to sync.

If you still experience problems with syncing, please follow these steps:

  1. When taking a measurement, ensure that the WiFi symbol on the scale stops flashing and turns solid, which indicates that a WiFi connection has been established.
  2. Stand on all four electrodes with bare feet. Remain on the scale for a few seconds to allow the scale to continue the measurement. Your weight and Body Fat % will appear on the scale.
  3. On the App, go to MENU > Weight > List, and check whether or not the last measurements taken have well been synchronized.


*credit to Sylvain of iHealth Labs EU
https://helpcenter.ihealthlabs.eu/hc/en-gb/articles/212040325-iHealth-Core-HS6-Error-messages-list

Related articles