Skip to main content

Installation

First use

  1. Download the free iHealth MyVitals app on the App Store or Google Play depending on the model of your smartphone, and then create your iHealth account.
  2. Charge the battery of your blood pressure monitor.

    While your device is charging, a lightning bolt will be displayed next to the battery icon. The battery is fully charged when the icon is completely full.

  3. Launch the iHealth MyVitals app and sign in to your account.
  4. Go to MENU > Set up my devices > Select a new device > Blood pressure monitor > Clear (BPM1) and follow the instructions on the screen.
    • Press the USER 2 button on the blood pressure monitor for 10 seconds.
    • Select the language: press the USER 1 button to navigate, then the USER 2 button to confirm.
    • Go to the Wi-Fi menu on your smartphone and activate the Wi-Fi.
    • For the Apple iOS only, in your smartphone's Wi-Fi menu, click on "iHealth-BPM1-xxxxx", then return to the iHealth MyVitals app.
    • Enter the Wi-Fi password and wait until the connection is established.
    • Set your user number.
    • Once the blood pressure monitor is connected to Wi-Fi, data will be synchronised automatically.

Your blood pressure monitor is ready! Give it a try, take a measurement.

Note - Installing the blood pressure monitor on your Wi-Fi network is only done for the initial installation or if you change your Wi-Fi router (or its configuration). Your blood pressure can be measured without first performing this installation. However, in this case, the results of your measurement will not be saved.

Sharing with a second user

  1. Launch the iHealth MyVitals app and sign in to your account.
  2. Go to MENU > Set up my devices > Clear > Share the device and enter the second user's email address.

Installing the blood pressure monitor as a second user

Each user of the blood pressure monitor must have his own iHealth MyVitals account.

  1. Download the free iHealth MyVitals app on the App Store or Google Play depending on the model of your smartphone, and then create your iHealth account or sign in.
    Note - When sharing with a second user, the email address must be identical to the one entered by User 1.
  2. Go to MENU > Set up my devices > Select a new device > Blood pressure monitor > Clear (BPM1) and select a user number available.

Installation video

 

*credit to Sylvain of iHealth Labs EU

https://helpcenter.ihealthlabs.eu/hc/en-gb/articles/115005412365-iHealth-Clear-BPM1-Installation

 

Was this article helpful?