List of error messages – Help Center

The pressure in the air circuit is unstable when the measurement is started. Try again without moving.

The blood pressure monitor does not detect systolic pressure.
Try again without moving.

The blood pressure monitor does not detect diastolic pressure.
Try again without moving.

The pneumatic system is blocked or the cuff is too tight while inflating.
Reposition the cuff correctly and try again.

Air leak in the pneumatic system or the cuff is not tight.
Reposition the cuff correctly and try again.

The pressure in the cuff is higher than 300 mmHg.
Wait 5 minutes and try again.

The pressure in the cuff is higher than 15 mmHg for more than 3 minutes.
Wait 5 minutes and try again.

Memory fault or error in the temperature probe.
Wait 5 minutes and try again.

Abnormality in checking the device's settings.
Wait 5 minutes and try again.

Pressure sensor fault.
Wait 5 minutes and try again.

Make sure that the monitor is placed correctly.
Place the monitor correctly and try again.

Please observe the precautions for use.

Check that the battery is sufficiently charged.